Polymer preparation station / polyelectrolyte preparation plant

details to article: 30237

description: 3-chamber polymer preparation station Ultromat ATF 1000 The Ultromat ATF is an automatic polyelectrolyte preparation system. This system can be used to prepare powder polymers and liquid polymers. Concentrations from 0.05 to 1.0 % can be set via the control system. By switching the Ultromat to liquid mode via the key switch in the control cabinet door, the powder dosing unit is switched off and the concentrate pump is activated. The agitator shafts and propellers of the agitators as well as the conveyor unit of the powder dosing unit are made entirely of corrosion-resistant stainless steel. The fill level in the third chamber is monitored by a fill level sensor. The dosing unit is equipped with idle indicators.

Producer:	Pro Minent
Typ:	Ultromat ATF 1000
Year of manufacture:	2001
Pieces:	1

technical data
Volume	1 m³ (total)
Tank level	0.333 m³ (content per chamber - 3 chambers in total)
Power	1000 l/h (withdrawal capacity)
Connections	(1 x DN 50 overflow connection)
	(3 x DN 25 tapping connection)
	(1 x 1 " NW - Water inlet)
	(DN 15 Liquid concentrate piping)
Power	2.6 kW (electrical connection power)
Amperage	25 A
Accessories	(Agitator 1, 2 and 3)
Power	0.55 kW
Revolutions per minute	750 1/min
Protection rating	55 IP
Accessories	(TGD 18 Powder dosing unit)
Power	18 kg/h (dosing capacity max.)
Length	2631 mm
Width	970 mm
Height	2250 mm
Weight	350 kg (empty weight)
Weight	1400 kg (total weight)
Video