---

EUROWATER electrodeionization unit

details to article: 29249

description: EDI system mounted on steel frame for the fully automatic production of ultrapure water. Normally, the system is operated following a UO system.
The plant consists essentially of:
1.The EDI system consists of 3 parallel stacks of the type MK2E (total of 6 stacks and 2 centrifugal pumps). Both roads are mounted on a common frame. one below, the other above in the frame.
2. Piping and EDI cells
3. Fittings, flow meters and centrifugal pumps

Producer:	EUROWATER
Year of manufacture:	2004
Pieces:	1

technical data Description  - (Figures refer to one EDI each with 3 stacks and 1 centrifugal pump) -  (Stacks of EDI 1 exchanged for new ones on 03.07.15 / EDI 2 on 31.05.16) Volume flow rate  5.1 / 10.5 m³/h (minute / Max. generated amount of dilute at 3 stacks) Volume flow rate  10.5 / 10.0 m³/h (Permeate amount 1 limit value / 2 limit value) Volume flow rate  0.6 m³/h (Concentrate per EDI 3 stacks) Volume flow rate  3.7 m³/h (Max. Concentrate input at 3 stacks) Volume flow rate  0.46 m³/h (approximately concentrate outflow at 3 stacks) Pressure  6.8 bar (Max. operating pressure) Further information  - (2x concentrate pump (Grundfos CHI 0.77KW)) Dimensions  (length1000 / width1100 / height 2000mm) Further information  (The system was already operated on an upstream reverse osmosis, and controlled by a central control cabinet at a water treatment plant) Length  1600 mm Width  1400 mm Height  2300 mm Weight  1030 kg () Video  send request      more info: Tipp Umwelt- und Verfahrenstechnik GmbH Obere Hilgenstock 34 D-34414 Warburg Tel.: +49 5641 7447-0 Fax: +49 5641 7447-28 email: mail@tipp-international.de Internet: www.tipp-international.de

enlarge image enlarge image enlarge image enlarge image enlarge image enlarge image enlarge image enlarge image enlarge image enlarge image enlarge image enlarge image