Polymer preparation station / polyelectrolyte preparation plant
description: 3-chamber polymer preparation station Ultromat ATF 1000 The Ultromat ATF is an automatic polyelectrolyte preparation system. This system can be used to prepare powder polymers and liquid polymers. Concentrations from 0.05 to 1.0 % can be set via the control system. By switching the Ultromat to liquid mode via the key switch in the control cabinet door, the powder dosing unit is switched off and the concentrate pump is activated. The agitator shafts and propellers of the agitators as well as the conveyor unit of the powder dosing unit are made entirely of corrosion-resistant stainless steel. The fill level in the third chamber is monitored by a fill level sensor. The dosing unit is equipped with idle indicators.
Producer:
Pro Minent
Typ:
Ultromat ATF 1000
Year of manufacture:
2001
Pieces:
1
technical data
Volume
1 m³ (total)
Tank level
0.333 m³ (content per chamber - 3 chambers in total)
Power
1000 l/h (withdrawal capacity)
Connections
(1 x DN 50 overflow connection)
(3 x DN 25 tapping connection)
(1 x 1 " NW - Water inlet)
(DN 15 Liquid concentrate piping)
Power
2.6 kW (electrical connection power)
Amperage
25 A
Accessories
(Agitator 1, 2 and 3)
Power
0.55 kW
Revolutions per minute
750 1/min
Protection rating
55 IP
Accessories
(TGD 18 Powder dosing unit)
Power
18 kg/h (dosing capacity max.)
Length
2631 mm
Width
970 mm
Height
2250 mm
Weight
350 kg (empty weight)
Weight
1400 kg (total weight)
Video
more info: Alle Angaben, Bilder, Hinweise und Empfehlungen erfolgen nach bestem Wissen, je- doch ohne Gewähr. Änderungen der technischen Angaben bleiben vorbehalten.