Tipp Umwelt- und Verfahrenstechnik GmbH - Obere Hilgenstock 34 - DE-34414 Warburg - +49 5641 7447-0


+49 5641 7447-0
+49 3212 7447-280
e-mail to us

used used tank stainless steel with compartments - 28307 - Typ: Becken aus Edelstahl - Producer Eisenmann - TIPP Umwelt- und Verfahrenstechnik GmbH

used tank stainless steel with compartments

details to article: 28307

Typ:Becken aus Edelstahl
Year of manufacture:2010
Condition:gebraucht / used / second hand

technical data

Description  ()
Dimensions  750 x 750 1000 mm ()
Dimensions  2630 / 1500 / 1000 mm ()
Further information  ()
Weight  265 kg

send request  
print view                       

Alle Angaben, Bilder, Hinweise und Empfehlungen erfolgen nach bestem
Wissen, je- doch ohne Gewähr. Änderungen der technischen Angaben bleiben vorbehalten.

Einige, ähnliche Artikel aus unserem derzeitigen Lagerbestand

gebrauchtes Edelst...

informations about: powder coatings

Powder coating is a type of coating that is applied as a free-flowing, dry powder. The main difference between a conventional liquid paint and a powder coating is that the powder coating does not require a solvent to keep the binder and filler parts in a liquid suspension form. The coating is typically applied electrostatically and is then cured under heat to allow it to flow and form a "skin". The powder may be a thermoplastic or a thermoset polymer. It is usually used to create a hard finish that is tougher than conventional paint. Powder coating is mainly used for coating of metals, such as "whiteware," aluminium extrusions, and automobile and bicycle parts. Newer technologies allow other materials, such as MDF (medium-density fibreboard), to be powder coated using different methods.
There are two main categories of powder coatings: thermosets and thermoplastics. The thermosetting variety incorporates a cross-linker into the formulation. When the powder is baked, it reacts with other chemical groups in the powder to polymerize, improving the performance properties. The thermoplastic variety does not undergo any additional reactions during the baking process, but rather only flows out into the final coating.

The most common polymers used are polyester, polyurethane, polyester-epoxy (known as hybrid), straight epoxy (fusion bonded epoxy) and acrylics.


The polymer granules are mixed with hardener, pigments and other powder ingredients in a mixer
The mixture is heated in an extruder
The extruded mixture is rolled flat, cooled and broken into small chips
The chips are milled and sieved to make a fine powder
The powder coating process involves three basic steps:

Part preparation or the pre-treatment
The powder application
Methylene chloride is generally effective at removing powder coating, however most other organic solvents (acetone, thinners, etc.) are completely ineffective. Most recently the suspected human carcinogen methylene chloride is being replaced by benzyl alcohol with great success. Powder coating can also be removed with abrasive blasting. 98% sulfuric acid commercial grade also removes powder coating film. Certain low grade powder coats can be removed with steel wool, though this might be a more labor-intensive process than desired.
From Wikipedia, the free encyclopedia

email: mail@tipp-international.de
Internet: www.tipp-international.de

high-speed search

re-purchase option

Buy and test! Profit from our fair and favorable conditions. Just ask.

article search

simple article search or professional search. Our search engine is very easy to handle. Find here your used plant/component.
...article search

individual advice

We are characterized by experience and competence. Whether simple container units or large waste water treatment plants - put us to the test and we will gladly convince you of our services!


Is does not matter - dismantling, decommission or relocation. We support you as fulfillment service supplier with specialist firms