Tipp Umwelt- und Verfahrenstechnik GmbH - Obere Hilgenstock 34 - DE-34414 Warburg - +49 5641 7447-0


+49 5641 7447-0
+49 3212 7447-280
e-mail to us

used used rotary pisten blower without power unit - 29303 - Typ: GMA 10,2 - Producer Aerzener - TIPP Umwelt- und Verfahrenstechnik GmbH

used rotary pisten blower without power unit

details to article: 29303

description: Rotary lobe blowers / Roots blowers without drive or attachments from Aerzen.

Typ:GMA 10,2
Year of manufacture:1991
Condition:gebraucht / used / second hand

technical data

Delivery rate  350 m³/h (Intake volume flow)
Pressure  1.0 bar (Suction pressure)
Pressure  0.55 bar (Pressure difference)
Rotations  3755 1/min ()
Connections  2x DN80 (flange)
Length  600 mm
Width  260 mm
Height  270 mm
Weight  80 kg ()

send request  
print view                       

Alle Angaben, Bilder, Hinweise und Empfehlungen erfolgen nach bestem
Wissen, je- doch ohne Gewähr. Änderungen der technischen Angaben bleiben vorbehalten.

Einige, ähnliche Artikel aus unserem derzeitigen Lagerbestand

gebrauchter Radial...
gebrauchter Drehsc...
gebrauchtes Drehko...
gebrauchter Radial...
gebrauchter Drehsc...
gebrauchtes Wälzko...
gebrauchtes Drehko...
gebrauchtes Seiten...
gebrauchtes Wälzko...

informations about: blowers / ventilators

A centrifugal fan ,also blower, or squirrel-cage fan, as it looks like a hamster wheel, is a mechanical device for moving air or other gases. It has a fan wheel composed of a number of fan blades, or ribs, mounted around a hub. The hub turns on a driveshaft that passes through the fan housing. The gas enters from the side of the fan wheel, turns 90 degrees and accelerates due to centrifugal force as it flows over the fan blades and exits the fan housing.
Centrifugal fans can generate pressure increases in the gas stream. Accordingly, they are well-suited for industrial processes and air pollution control systems. They are also common in central heating or cooling systems.
Centrifugal compressors, sometimes termed radial compressors, are a sub-class of dynamic axisymmetric work-absorbing turbomachinery.
Centrifugal impeller with a highly polished surface likely to improve performance
Jet engine cutaway showing the centrifugal compressor and other parts
The idealized compressive dynamic turbo-machine achieves a pressure rise by adding kinetic energy or velocity to a continuous flow of fluid through the rotor or impeller. This kinetic energy is then converted to an increase in potential energy or static pressure by slowing the flow through a diffuser.
Imagine a simple case where flow passes through a straight pipe to enter centrifugal compressor. The simple flow is straight, uniform and has no swirl. As the flow continues to pass into and through the centrifugal impeller, the impeller forces the flow to spin faster and faster. According to a form of Eulers fluid dynamics equation, known as pump and turbine equation, the energy input to the fluid is proportional to the flows local spinning velocity multiplied by the local impeller tangential velocity. In many cases the flow leaving centrifugal impeller is near or above 1000 ft. per s or approximately 300 m per s. It is at this point, in the simple case according to Bernoullis principle, where the flow passes into the stationary diffuser for the purpose of converting this velocity energy into pressure energy.
From Wikipedia, the free encyclopedia

email: mail@tipp-international.de
Internet: www.tipp-international.de

high-speed search


Is does not matter - dismantling, decommission or relocation. We support you as fulfillment service supplier with specialist firms

individual advice

We are characterized by experience and competence. Whether simple container units or large waste water treatment plants - put us to the test and we will gladly convince you of our services!


You want to contact us? It's quite easy:

+49 5641 7447-0

We look forward to your questions and comments.

re-purchase option

Buy and test! Profit from our fair and favorable conditions. Just ask.